Parameters 21326.74 Torque ref ramp out Displays the torque reference after limiting and ramping. Seethe control chain diagram on page 427.This parameter is read-only.--1600.0…1600.0% Torque reference after limiting and ramping. See par.46.0326.75 Torque referenceact 5Displays the torque reference after control mode selection.See the control chain diagram on page 429.This parameter is read-only.--1600.0…1600.0% Torque reference after control mode selection. See par.46.032828 Frequency referencechainSettings for the frequency reference chain.See the control chain diagrams on pages 430 and 421.28.01 Frequency ref rampinputDisplays the used frequency reference before ramping. Seethe control chain diagram on page 430.This parameter is read-only.--500.00…500.00HzFrequency reference before ramping. See par.46.0228.02 Frequency ref rampoutputDisplays the final frequency reference (after selection,limitation and ramping). See the control chain diagram onpage 430.This parameter is read-only.--500.00…500.00HzFinal frequency reference. See par.46.02No. Name/Value Description Def/FbEq16
