288 Parameters50.14 FBA A reference 1 Displays raw (unmodified) reference REF1 sent by the master(PLC) to fieldbus adapter A if debugging is enabled byparameter 50.12 FBA A debug mode.This parameter is read-only.--2147483648…2147483647Raw REF1 sent by master to fieldbus adapter A. -50.15 FBA A reference 2 Displays raw (unmodified) reference REF2 sent by the master(PLC) to fieldbus adapter A if debugging is enabled byparameter 50.12 FBA A debug mode.This parameter is read-only.--2147483648…2147483647Raw REF2 sent by master to fieldbus adapter A. -50.16 FBA A status word Displays the raw (unmodified) status word sent by fieldbusadapter A to the master (PLC) if debugging is enabled byparameter 50.12 FBA A debug mode.This parameter is read-only.-00000000h…FFFFFFFFhStatus word sent by fieldbus adapter A to master. -50.17 FBA A actual value1Displays raw (unmodified) actual value ACT1 sent by fieldbusadapter A to the master (PLC) if debugging is enabled byparameter 50.12 FBA A debug mode.This parameter is read-only.--2147483648…2147483647Raw ACT1 sent by fieldbus adapter A to master. -50.18 FBA A actual value2Displays raw (unmodified) actual value ACT2 sent by fieldbusadapter A to the master (PLC) if debugging is enabled byparameter 50.12 FBA A debug mode.This parameter is read-only.--2147483648…2147483647Raw ACT2 sent by fieldbus adapter A to master. -5151 FBA A settings Fieldbus adapter A configuration.51.01 FBA A type Displays the type of the connected fieldbus adapter module.0 = Module is not found or is not properly connected, or isdisabled by parameter 50.01 FBA A enable; 0 = None;1 = PROFIBUS-DP; 32 = CANopen; 37 = DeviceNet;128 = Ethernet; 132 = PROFInet IO; 135 = EtherCAT;136 = ETH Pwrlink; 485 = RS-485 comm; 101 = ControlNet;This parameter is read-only.-51.02 FBA A Par2 Parameters 51.02…51.26 are adapter module-specific. Formore information, see the documentation of the fieldbusadapter module. Note that not all of these parameters arenecessarily in use.-0…65535 Fieldbus adapter configuration parameter. 1 = 1… … … …51.26 FBA A Par26 See parameter 51.02 FBA A Par2. -0…65535 Fieldbus adapter configuration parameter. 1 = 1No. Name/Value Description Def/FbEq16
