13.2 Logic for group alarm ALMCALH GUID-64EA392C-950F-486C-8D96-6E7736B592BF v113.2.1 Identification GUID-64EA392C-950F-486C-8D96-6E7736B592BF v1Function description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberLogic for group alarm ALMCALH - -13.2.2 Application GUID-70B268A9-B248-422D-9896-89FECFF80B75 v1Group alarm logic function ALMCALH is used to route alarm signals to differentLEDs and/or output contacts on the IED.ALMCALH output signal and the physical outputs allows the user to adapt the alarmsignal to physical tripping outputs according to the specific application needs.13.2.3 Setting guidelines GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2Operation: Enabled or Disabled13.3 Logic for group alarm WRNCALH13.3.1 Identification GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v4Function description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberLogic for group warning WRNCALH - -13.3.1.1 Application GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1Group warning logic function WRNCALH is used to route warning signals to LEDsand/or output contacts on the IED.WRNCALH output signal WARNING and the physical outputs allows the user toadapt the warning signal to physical tripping outputs according to the specificapplication needs.Section 13 1MRK 505 370-UUS ALogic408 Busbar protection REB670 2.2 ANSIApplication manual
