Name of input Type Default Description Value whenactivatedValue whendeactivatedIN12 BOOLEAN 0 Input 12 2048 0IN13 BOOLEAN 0 Input 13 4096 0IN14 BOOLEAN 0 Input 14 8192 0IN15 BOOLEAN 0 Input 15 16384 0IN16 BOOLEAN 0 Input 16 32768 0The sum of the numbers in column “Value when activated” when all INx (where1≤x≤16) are active that is=1; is 65535. 65535 is the highest boolean value that can beconverted to an integer by the BTIGAPC function block.13.9 Integer to Boolean 16 conversion IB16 SEMOD158367-1 v213.9.1 IdentificationSEMOD167941-2 v2Function description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberInteger to boolean 16 conversion IB16 - -13.9.2 Application SEMOD158499-5 v4Integer to boolean 16 conversion function (IB16) is used to transform an integer into aset of 16 binary (logical) signals. It can be used – for example, to connect integeroutput signals from one function to binary (logical) inputs to another function. IB16function does not have a logical node mapping.The Boolean 16 to integer conversion function (IB16) will transfer a combination of upto 16 binary inputs INx where 1≤x≤16 to an integer. Each INx represents a valueaccording to the table below from 0 to 32768. This follows the general formula: INx =2x-1 where 1≤x≤16. The sum of all the values on the activated INx will be available onthe output OUT as a sum of the values of all the inputs INx that are activated. OUT isan integer. When all INx where 1≤x≤16 are activated that is = Boolean 1 it correspondsto that integer 65535 is available on the output OUT. IB16 function is designed forreceiving up to 16 booleans input locally. If the BLOCK input is activated, it willfreeze the output at the last value.Values of each of the different OUTx from function block IB16 for 1≤x≤16.Section 13 1MRK 505 370-UUS ALogic416 Busbar protection REB670 2.2 ANSIApplication manual
