13.3.1.2 Setting guidelines GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2OperationEnabled or Disabled13.4 Logic for group indication INDCALH13.4.1 Identification GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v4Function description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberLogic for group indication INDCALH - -13.4.1.1 Application GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1Group indication logic function INDCALH is used to route indication signals todifferent LEDs and/or output contacts on the IED.INDCALH output signal IND and the physical outputs allows the user to adapt theindication signal to physical outputs according to the specific application needs.13.4.1.2 Setting guidelines GUID-7E776D39-1A42-4F90-BF50-9B38F494A01E v2Operation: Enabled or Disabled13.5 Configurable logic blocks IP11009-1 v3The configurable logic blocks are available in two categories:• Configurable logic blocks that do not propagate the time stamp and the quality ofsignals. They do not have the suffix QT at the end of their function block name,for example, SRMEMORY. These logic blocks are also available as part of anextension logic package with the same number of instances.• Configurable logic blocks that propagate the time stamp and the quality of signals.They have the suffix QT at the end of their function block name, for example,SRMEMORYQT.1MRK 505 370-UUS A Section 13LogicBusbar protection REB670 2.2 ANSI 409Application manual
