Use only characters A - Z, a - z and 0 - 9 in station, unit and object names.15.7 Product information PRODINF15.7.1 IdentificationFunction description IEC 61850identificationIEC 60617identificationANSI/IEEE C37.2device numberProduct information PRODINF - -15.7.2 Application15.7.2.1 Factory defined settingsThe factory defined settings are very useful for identifying a specific version and veryhelpful in the case of maintenance, repair, interchanging IEDs between differentSubstation Automation Systems and upgrading. The factory made settings can not bechanged by the customer. They can only be viewed. The settings are found in the localHMI under Main menu/Diagnostics/IED status/Product identifiersThe following identifiers are available:• IEDProdType• Describes the type of the IED (like REL, REC or RET). Example: REL650• ProductVer• Describes the product version. Example: 1.2.31 is the Major version of the manufactured product this means, new platform of the product2 is the Minor version of the manufactured product this means, new functions or new hardwareadded to the product3 is the Major revision of the manufactured product this means, functions or hardware is eitherchanged or enhanced in the product• ProductDef• Describes the release number, from the production. Example: 1.2.3.4 where;1 is the Major version of the manufactured product this means, new platform of the product2 is the Minor version of the manufactured product this means, new functions or new hardwareadded to the product1MRK 511 286-UUS A Section 15Basic IED functions333Application manual
