ABB REG670 Commissioning Manual

Also see for Relion REG670: Operator's manual Product guide Installation manual Product guide Commissioning manual

Contents

ABB REG670 Commissioning Manual Manual pdf 119 page image

IEC140000144 V1 EN-USFigure 36: Captured synchrophasor data11.5.2 Verifying the IEEE C37.118/1344 UDP communicationGUID-F0D1117D-3D0F-498F-A00C-242763F8A4E6 v1After setting both PMU configuration and the UDP client configuration (Asexplained in sections Setting the PMU station communication (PMU Report),Setting the PMU station communication (PMU configuration) and Setting theTCP/UDP client communication) and making sure that the Ethernetcommunication is set up, click Connect on the PMU Connection Tester tool.IEC140000145-1-en.vsdIEC140000145 V1 EN-USFigure 37: Verifying the UDP communication using PMU Connection Tester• Now it should be possible to see the streaming synchrophasor data.• Verify the communication by following the same steps as in section Verifyingthe IEEE C37.118/1344 TCP communication.1MRK 502 073-UEN A Section 11Establishing connection and verifying the IEEE C37.118/1344 communicationGenerator protection REG670 2.2 IEC and Injection equipment REX060, REX061, REX062 113Commissioning manual