24Configuration menus layoutThe menu options are arranged as shown here:For a description of each option within the Configuration menus, seeAppendix 1 for more details.General security and configuration stepsTo enable general security1 Display the Configuration menu.2 Highlight ‘Setup Options’ and press .3 Highlight ‘Security’ and press to select ‘ENABLED’.4 Now create a new password for the ADMIN user account.To set an ADMIN password1 Display the Configuration menu.2 Highlight ‘Edit User List’ and press .3 Highlight ‘ADMIN’ and press . Press again to accept thename ‘ADMIN’ without change.4 Enter an appropriate password for the ADMIN user accountwith regard to the following:• The password can be up to 12 characters long.• The password can use letters, numerals and/or certainpunctuation marks.• The password is not case sensitive.5 Press . The ‘Edit Access Rights’ menu will be displayed.However, as the ADMIN account always has access to allcomputers, press again to save the new password.What to do if the ADMIN password has been forgotten.To change the hotkeysAdderView CATx units use and as their standard hotkeys.These can be changed if they clash with other software orhardware within the installation.1 Display the Configuration menu.2 Highlight ‘Setup Options’ and press .3 Highlight ‘Hotkeys’ and press to select the requiredhotkey combination. The options are: CRTL+ALT, CTRL+SHIFT,ALT+SHIFT, ALT GR, LEFT ALT+RIGHT ALT, LEFT CTRL+LEFT ALT,RIGHT CTRL+RIGHT ALT or DISABLED.4 Press to return to the ‘Configuration Menu’.
