ADJ FOCUS FLEX L19 User Manual

F I X T U R E I N S TA L L AT I O NFLAMMABLE MATERIAL WARNINGKeep fixture at least 7.9in. (0.2m) away from any flammable materials, decorations,pyrotechnics, etc.ELECTRICAL CONNECTIONSA qualified electrician should be used for all electrical connections and/orinstallations.MINIMUM DISTANCE TO OBJECTS/SURFACES MUST BE 40 FEET (12 METERS)DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!Fixture MUST be installed following all local, national, and country commercial electrical and constructioncodes and regulations. Before rigging/mounting the fixture to any metal truss/structure or placing thefixture on any surface, a professional equipment installer MUST be consulted to determine if the metaltruss/structure or surface is properly certified to safely hold the combined weight of the fixture, clamps,cables, and accessories.Overhead fixture installation must always be secured with a secondary safety attachment, such as anappropriately rated safety cable that meets all local, national, and country codes and regulations.Fixture ambient operating temperature range is 14°F to 113°F. (-10°C to 45°C). Do not use this fixturewhen ambient temperature falls outside of this range!Fixture should be installed away from walking paths, seating areas, or areas where unauthorizedpersonnel might reach the fixture by hand.NEVER stand directly below the fixture when rigging, removing, or servicing.Allow approximately 15-minutes for the fixture to cool down before servicing.11