NOTE: In order for RDM to work properly, RDM enabled equipment must be used throughoutthe entire system, including DMX data splitters and wireless systems.Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standard forlighting, and allows the DMX systems of the fixtures to be modified and monitored remotely. Thisprotocol is ideal for instances in which a unit is installed in a location that is not easily accessible.With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled con-troller to send out a signal to devices on the wire, as well as allowing the fixture to respond (knownas a GET command). The controller can then use its SET command to modify settings that wouldtypically have to be changed or viewed directly via the unit’s display screen, including the DMX Ad-dress, DMX Channel Mode, and Temperature Sensors.FIXTURE RDM INFORMATION:Device ID Device Model ID RDM Code Personality ID0038 0000-FFFF 0038 0x1900Basic 22 (1)Standard 31 (2)Extended 40 (3)Extended 104 (4)Standard CMY 25 (5)Extended CMY 28 (6)Please be aware that not all RDM devices support all RDM features, and therefore it is importantto check beforehand to ensure that the equipment that you are considering includes all of the fea-tures that you require.The following parameters are accessible in RDM on this device:[0x0011] Proxied Device Count [0x0032] Clear Status ID [0x0603] Realtime Clock[0x0200] Sensor Definition [0x0401] Lamp Hours [0x1010] Power State[0x0201] Sensor Value [0x0402] Lamp Strikes [0x1031] Preset Playback[0x0080] Device Model Description [0x0403] Lamp State [0x0122] Default Slot Value[0x0081] Manufacturer Label [0x0404] Lamp Mode [0x00B0] Language[0x0082] Device Label [0x0405] Device Power Cycles [0x00A0] Language Capabilities[0x00E0] DMX Personality [0x0600] Pan Invert [0x00C2] Boot Software Version Label[0x00E1] DMX Personality Description [0x0601] Tilt Invert [0x00C1] Boot Software Version ID[0x0400] Device Hours [0x0602] Pan Tilt Swap [0x0070] Product Detail ID List[0x0015] Comms Status [0x0500] Display Invert [0x0030] Status Messages[0x0031] Status ID Description [0x0501] Display LevelR E M O T E D E V I C E M A N A G E M E N T ( R D M )16