ADJ FOCUS FLEX L19 User Manual

S Y S T E M M E N UThe fixture includes an easy to navigate system menu. The control panel located on the front of thefixture, provides access to the main system menu and is where all necessary system adjustments aremade to the fixture. During normal operation, pressing MODE button once will access the fixture’s mainmenu. Once in the main menu you can navigate through the different functions and access the sub-menus with the UP, DOWN, RIGHT, and LEFT buttons. Once you reach a field that requires adjusting,press the ENTER button to activate that field and use the UP and DOWN buttons to adjust the field.Pressing the ENTER button once more will confirm your setting. You may exit the main menu at anytime without making any adjustments by pressing the MODE button.NOTE: To access the LCD Menu Control Display via the internal battery, press and hold the MODEbutton for 10 seconds. The LCD Menu Control Display will shut OFF automatically about 1 minute fromthe last button press.17KEY LOCKThis function allows the user to configure whether or not the display screen and control panel keyswill lock after a certain period of inactivity. It can be accessed by navigating to Personality > Display >Key Lock in the system menu. The setting options are described below:• OFF: The display screen and control panel keys remain active at all times.• ON: The display screen and control panel keys automatically lock after a certain period of inactivity,which can be set under Personality > Display > Screen Saver Delay. To unlock, press and hold theMODE button for 3 seconds.• ON1: The display screen and control panel keys automatically lock after a certain period ofinactivity, which can be set under Personality > Display > Screen Saver Delay. To unlock, press UP,DOWN, UP, DOWN, ENTER in that order.SERVICE PORT / SOFTWARE UPDATESPlease contact ADJ customer support or latest software and updating instructions.