S A F E T Y G U I D E L I N E STo guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual.ADJ Products, LLC is not responsible for injury and/or damages resulting from the misuse of this fixturedue to the disregard of the information printed in this manual. Only qualified and/or certified personnelshould perform installation of this fixture and only the original rigging parts included with this fixtureshould be used for installation. Any modifications to the fixture and/or the included mounting hardwarewill void the original manufacturer’s warranty and increase the risk of damage and/or personal injury.PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDEDTHERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT. DO NOT ATTEMPTANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR MANUFACTURER’SWARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO THIS FIXTUREAND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES IN THISMANUAL VOID THE MANUFACTURER’S WARRANTY AND ARE NOT SUBJECT TOANY WARRANTY CLAIMS AND/OR REPAIRS.DO NOT PLUG FIXTURE INTO A DIMMER PACK!NEVER OPEN THIS FIXTURE WHILE IN USE!UNPLUG POWER BEFORE SERVICING FIXTURE!NEVER TOUCH FIXTURE DURING OPERATION AS IT MAY BE HOT!MAXIMUM AMBIENT TEMPERATURE IS 113°F (45°C). DO NOT OPERATE WHENAMBIENT TEMPERATURE EXCEEDS THIS VALUE!UNIT SURFACE TEMPERATURE MAY REACH UP TO 167°F (75°C). DO NOT TOUCHTHE HOUSING WITH BARE HANDS DURING OPERATION! TURN OFF THE POWERAND ALLOW ABOUT 15 MINUTES FOR THE UNIT TO COOL DOWN BEFOREREPLACING OR SERVICING.KEEP FLAMMABLE MATERIALS AWAY FROM FIXTURE!IF THE FIXTURE IS EXPOSED TO ENVIRONMENTAL TEMPERATURE CHANGES SUCHAS RELOCATION FROM AN OUTDOOR COLD TO AN INDOOR WARM ENVIRONMENT,DO NOT POWER THE FIXTURE ON IMMEDIATELY. INTERNAL CONDENSATION ASA RESULT OF ENVIRONMENTAL TEMPERATURE CHANGE CAN CAUSE INTERNALFIXTURE DAMAGE. LEAVE THE FIXTURE POWERED OFF UNTIL IT HAS REACHEDROOM TEMPERATURE BEFORE POWERING ON.NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE! RETINA INJURY RISK - MAYINDUCE BLINDNESS! SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK!THIS IS A RISK GROUP 3 (HIGH RISK) PRODUCT ACCORDING TO EN 62471 ANDIEC/TR 62778. THE LUMINAIRE SHOULD BE POSITIONED 63 METERS OR MOREFROM THE OUTPUT OF THE FIXTURE TO REDUCE OR ELIMINATE EXPOSURE.8