ADJ VIZI BEAM RXONE User Manual

Also see for VIZI BEAM RXONE: User instructions

ADJ Products, LLC - www.adj.com - Vizi Beam RXONE User Manual Page 33Vizi Beam RXONE ADJ UC IR/Airstream IR ControlThe UC IR (sold separately) infrared remote gives you control of various functions (See below). Tocontrol the fixture you must aim the remote at the front of the fixture. Maximum range is 30 feet.Please see below for IR functions.The Airstream IR (sold separately) remote transmitter plugs into the headphone jack of your iOSphone or tablet. To control your IR fixture you must raise the volume to the maximum on your iOSphone or tablet and aim the transmitter at the fixture sensor. Maximum range is 15 feet. After youhave purchased the Airstream IR transmitters, the app is a free download from the app store for youriOS phone or tablet. The app comes with 3 pages of control depending on the fixture you are using.Please see below for IR functions including the corresponding app page.Works with App page 1.STAND BY - Pressing this button will blackout the fixture. Press the button again to return to theinitial state.FULL ON - Hold this button down to fully light up the unit. When the button is released, the unit willreturn to its previous state.FADE/GOBO - This button activates gobo selection. Press this button and use buttons 1-9 to findyour desired gobo.“DIMMER +” and “DIMMER -” - These buttons are used to adjust the output intensity in static colormode.STROBE - Press and hold this button for strobing.COLOR - This button activates color selection. Press this button and use buttons 1-9 to find yourdesired color.1-9 - Use buttons 1-9 to select your desired color when color selection is active, your desired gobowhen gobo selection is active, and your desired show when show mode is active.SOUND ON & OFF - Use the buttons to activate and deactivate sound active mode.SHOW 0 - Press this button to activate show mode. Use buttons 1-4 to find your desired show.