ADTRAN TA 544 User Manual

Contents

TA 544 User Manual/61200704L1-1APage 23 of 68© 2001, ADTRAN, Inc. TA 544 User ManualStart TransferThis activator is used when the configurable items in this menu are complete.Abort TransferUse this activator to cancel any TFTP transfer in progress.TFTP ServerSetting this to Y ES allows another TA 544 to upgrade its code using TFTP client. This, in effect, turns on theTA 544 TFTP server function and allows its code to be “cloned.” Setting to N O (def) will deny any requestfrom TFTP clients.> Config TransferSends a file containing the TA 544 configuration to a PC connected to the CRAFT port using XMODEM protocol orto a file on a TFTP server using the TFTP protocol. See Appendix B. Updating TA 544 Firmware using XMODEMon page 51 and Appendix C. Updating TA 544 Firmware using TFTP on page 54 for details.C ONFIG T RANSFER also lets you save the TA 544 configuration as a backup file, so you can use the same configurationwith multiple TA 544 units. In addition, C ONFIG T RANSFER can retrieve a configuration file from a TFTP server.To support these transfers, ADTRAN delivers a TFTP program with the TA 544 called TFTP Server. You can con-figure any PC running Microsoft Windows with this software, and store a configuration file.Only one configuration transfer session (upload or download) can be active at a time.Transfer MethodDisplays the method used to transfer the configuration file to or from a server. XMODEM and TFTP aresupported.Transfer TypeOnly B INARY transfers are currently supported.TFTP Server IP AddressSpecifies the IP address of the TFTP server. Get this number from your system administrator.Before using S TART TRANSFER , the TA 544 should have a valid IP address, subnet mask, anddefault gateway (if required).Before using C ONFIG TRANSFER , the TA 544 should have a valid IP address, subnet mask, anddefault gateway (if required).