TA 544 User Manual © 2001, ADTRAN, Inc.TA 544 User Manual/61200704L1-1APage 48 of 68The following settings are used for FRF8.L AN FR MAINT P ROTOCOL Frame Relay maintenance or signaling protocolbetween local V.35 port and the attached DTEport, support ANSI Annex A, CCITT Q933 An-nex D, CISCO LMI or Static (no signaling).L AN FR POLL TIMEOUTT392 (5-30)T392 for signaling protocol, typical value 15. Nomeaning if Maint Protocol is Static.F R /ATM PVC MAPPING Up to 4 mappings are supported.FR DLCI Frame Relay DLCI on V.35 port.ATM VPI Specifies the virtual path to which DLCI ismapped.ATM VCI Specifies the virtual circuit to which DLCI ismapped.TRANSLATE Translate or transparent mode betweenFrame Relay frames and ATM cells.D E MAP Map Frame Relay DE bit to ATM CLPI bit,Always 0, Always 1 or Convert each other.F ECN MAP Map Frame Relay FECN bit toATM EFCIbit, Always 0, Always 1 or Convert eachother.
