ADTRAN TA 544 User Manual

Contents

TA 544 User Manual © 2001, ADTRAN, Inc.TA 544 User Manual/61200704L1-1APage 40 of 68Configuring the Router – StatusUse the R OUTER /S TATUS menu to view and set the parameters shown in Figure 13. The R OUTER /STATUSscreens give the user useful information for debugging the current routes in the TA 544.Figure 13. Router/Status Menu> SessionThis menu maintains statistics about the active ATM PVCs.> ARP cacheThis is a listing of the currently connected Ethernet port on the LAN.> Bridge TableThis shows the detected MAC addresses and the interface to which they are associated.> IP RoutesThis shows the current routes in theTA 544 and their use.LAN- TO -WAN (OUT) The packets which come out toward theWAN from the TA 544 can be filtered inthree ways:D ISABLED (DEF) Turns off packet output filtering. Nooutgoing packets are blocked.B LOCK A LL All outgoing packets to the WAN are blockedexcept as defined in the F ILTERS/OUTEXCEPTIONS list.F ORWARD A LL All outgoing packets to the WAN are notblocked except as defined in the F ILTERS/OUT E XCEPTIONS list.OUT E XCEPTIONS This is a list of up to 32 entries. The setup is exactlythe same as the FILTERS/OUT EXCEPTIONS list.