ADTRAN Total Access 1248 Installation And Maintenance Practice

Also see for Total Access 1248: Specifications Installation and maintenance practice

Contents

Menu Descriptions61179641L4-5B 5-75SNMP Trap Hosts MenuSNMP Trap HostsMain Menu\System Management\SNMP/TL1 Configuration\SNMP Trap Hosts\The SNMP Trap Hosts Menu (see Figure 5-47) is used to set multiple IP Addresses (trap desti-nations) and SNMP versions for notification of a trap. A trap is an automatic alert, or notifi-cation, sent to an IP Address. The Total Access 1248 system forwards SNMP traps to allconfigured hosts as the traps occur.Figure 5-47. SNMP Trap Hosts MenuThe SNMP Trap Hosts menu options are shown in Table 5-47.Table 5-47. SNMP Trap Hosts Menu OptionsOption Description Function1 IP Address This option is used to configure the first SNMP trap hostIP address in decimal dot format (i.e., ###.###.###.###).2 Version This option is used to configure the SNMP version for thefirst SNMP trap host. Options include the following:• SNMPv1• SNMPv23 IP Address This option is used to configure the second SNMP traphost IP address in decimal dot format (i.e.,###.###.###.###).TID: TA1248 Total Access 1248Unacknowledged Alarms: NoneSNMP Trap HostsSet IP address to enter Trap Host. Set IP address to D to delete Trap Host1. IP Address 0.0.0.02. Version3. IP Address 0.0.0.04. Version5. IP Address 0.0.0.06. Version7. Trap Port 162Selection :'?' - System Help Screen