Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice5-148 61179641L4-5BService Mode for Port: # MenuService Mode for Port: #Main Menu\DSL Menus\DSL Provisioning\Port Provisioning\Service Mode for Port: #\The Service Mode option on the Port Provisioning Menu displays the Service Mode for Port: #menu. The # represents the value displayed for the Select Port option. The service mode refersto the data mode for the traffic between the DSLAM and the modem.The Service Mode for Port: # menu options are shown in Table 5-103.If a mode is specified, it must be one supported by the customer’s modem.Hamband Mask for Port: # MenuHamband Mask for Port: #Main Menu\DSL Menus\DSL Provisioning\Port Provisioning\Hamband Mask for Port: #\The Hamband Mask option on the Port Provisioning Menu displays the Hamband Mask forPort: # menu. The # represents the value displayed for the Select Port option. Hamband Maskis for masking out frequencies that are used by hamband (ham radios) so that thosefrequencies and their respective tones do not interrupt the training process.The Hamband Mask for Port: # menu options are shown in Table 5-104.Table 5-103. Service Mode for Port: # Menu OptionsOption Description Function1 Multimode Multimode allows the DSLAM and the modem to pick amode for the line to use to train up.2 T1.413 This option sets T1.413 as the Service Mode.3 G.dmt This option sets G.dmt as the Service Mode.4 G.lite This option sets G.lite as the Service Mode. If the modeis set to G.lite, the Line Type should be set to Interleavefrom the “ADSL Profiles Menu” on page 5-138 for theseports. Even if the Line Type remains set to Fast, themodem can only train up as Interleave.5 ADSL2 This option sets ADSL2 as the Service Mode.6 ADSL2.lite This option sets ADSL2.lite as the Service Mode.7 ADSL2+ This option sets ADSL2+ as the Service Mode.8 READSL This option sets READSL as the Service Mode.9 Legacy Multimode (ADSL1) This option sets Legacy Multimode as the Service Mode.
