Total Access 1248 Octal T1 IMA DSLAM Installation and Maintenance Practice5-82 61179641L4-5BNOTEAuto Upgrade operations will not be initiated if the AUC RefreshInterval option is set to zero, the AUC Config File option is empty,the configuration file cannot be retrieved from the AUC TFTPServer, or the configuration file contains errors.Table 5-50. Auto Upgrade Configuration (AUC) Status Menu OptionsOption Description Function1 AUC Config File This option is used to enter the AUC Config File name.The text entry field is limited to 40 characters and mustend with the *.auc file extension.2 AUC Mode This option is used to specify the auto upgrade mode.Options include the following:• Auto - indicates that unit should be automaticallychecked and upgraded.• Manual - indicates that unit should be checked atthe AUC Refresh Interval rate and upgraded onlywhen instructed via SNMP or the menus.• Disable - all automatic upgrade operations aredisabled.3 AUC Refresh Interval This option specifies how often (in hours) the unitshould check the AUC TFTP Server for changes to theAUC Config File. Valid entries are 0 - 744. A value of zero(0) indicates the server should not be checked and dis-ables any further Auto Upgrade operations.4 AUC Upgrade Retries This option specifies the number of software upgradeattempts that are to be made as a result of a failure.Valid entries are 0 - 10.5 AUC TFTP Server This option specifies the IP address of the AUC TFTPServer.6 AUC Base Path This option specifies a directory prefix where the AutoUpgrade configuration and flash firmware files will belocated on the customer file server.
