Menu Descriptions61179641L4-5B 5-21Create a New PVC/PVP ScreenCreate New PVC/PVPMain Menu\ATM Circuit Management\PVC/PVP Management\Create New PVC/PVP\The Create a New PVC/PVP screen (see Figure 5-12) is used to create the PVC/PVPs for ADSLconnections. Each ADSL connection has at least one PVC/PVP per ATM circuit provisioned fordata flow. PVC/PVPs map ATM circuits from the network to the ADSL ports.Figure 5-12. Create a New PVC/PVP ScreenThe Create a New PVC/PVP screen fields are shown in Table 5-7.Table 5-7. Create a New PVC/PVP Screen FieldsField DescriptionEndpoint 1 Port This field displays the network port.Endpoint 1 VPI This field displays the Virtual Path Identifier for the ATM portfrom the Network. Valid values range from 0 to 4095.Endpoint 1 VCI This field displays the Virtual Channel Identifier for the ATMport from the network. Valid values range from 0 to 65535.Endpoint 2 Port This field displays the ATM port that is being created. Validvalues range from 1 to 48.Endpoint 2 VPI This field displays the Virtual Path Identifier for the ATM port.Valid values range from 0 to 4095.Endpoint 2 VCI This field displays the Virtual Channel Identifier for the ATM.Valid values range from 0 to 65535.Create a New PVC/PVPEndpoint 1 (Net --> Cust) Endpoint 2 (Net <-- Cust)Port VPI VCI Port VPI VCINetw 35 1000 1 0 35____________________________________________________________Service Pkt Discard PCRUBR Enabled Best EffortCircuit IDN/A____________________________________________________________When finished, place cursor here to select action:Create new circuit and return to PVC/PVP ManagementNOTE: No changes will take effect until an action is selected and executed.To Select an action, place the cursor over the Action option and press theSpace Bar. To execute the action, press Enter.Enter a VPI value between 0 an 4095.
