225.3.2. S-BPM OperationsTo start S-BPM.Step 1. Select the S-BPM program and store its parameters.Step 2. Set the AUTO switch to "OFF".Step 3. Operations are as follows:S-BPM Programs OperationsOffice blood pressure OBPAutomated office blood pressure AOBPHome blood pressure HBPPress the / switch tostart the preset programduring waiting mode.Automated night blood pressure ANBPAutomated self blood pressure ASBPPreset program entersstandby until the "start time"or "start time of alarm".To stop S-BPM.Operations are as follows:S-BPM Programs OperationsOffice blood pressureOBPAutomated officeblood pressure AOBPHome blood pressureHBPPress the / switch to stop bloodpressure measurement.Automated nightblood pressure ANBPAutomated selfblood pressure ASBPPress the / switch to stop bloodpressure measurement. At next start time, bloodpressure is measured or the buzzer sounds. #1If you need to stop the recorder completely,remove batteries from the recorder or switch toOBP, AOBP, or HBP.#1 : Refer to "6.2.1. S-BPM Programs".
