678.7. Blood Pressure Measurement Operations8.7.1. A-BPM OperationsWhen A-BPM is started, blood pressure is measured inaccordance with the preset parameters.NoteSet the built-in clock and initial pressurization value beforemeasurement because A-BPM uses them. Refer to "8.2.2. TheClock and the Monitor Function of Measurement" and "8.3.A-BPM Preset Programs".When the recorder is removed, set the AUTO switch to "OFF".If the recorder is removed during A-BPM, the inflation of the cuffis started next start time, the cuff may break. When A-BPM isresumed, set the AUTO switch to "ON".The mark is displayed while A-BPM is used.Manual blood pressure measurement can be performed duringA-BPM waiting mode.The measurement result of the manual blood pressuremeasurement can be stored in the memory.When A-BPM is stopped, the error code E07 is displayed onthe OLED display and stored in the memory.To start A-BPMStep 1. Set the AUTO switch to "ON".Step 2. The mark is shown on the OLED display and LCD panel.A-BPM is started.
