245.3.3. Other OperationsTo return from waiting mode and show the monitor.If the indication of the OLED display or LCD panel is hidden, pressthe START/STOP or EVENT switch to return to the display ofwaiting mode.Deleting measurement dataStep 1. Set the AUTO switch to "OFF".Step 2. If the indication of the display is hidden, press theSTART/STOP or EVENT switch to return to the display ofwaiting mode.Step 3. While holding the START/STOP switch and hold the EVENTswitch for 9 seconds or more. DataClear is displayed on theOLED display.Step 4. Press and hold the START/STOP switch for 3 seconds. Data isdeleted and the recorder returns to waiting mode.To start data communication with dedicated peripheral using the USB cable.Step 1. Connect the micro USB cable between the recorder anddedicated peripheral.Step 2. The buzzer will sound and will display on the LCD panel.The state of data communication enters standby mode.Step 3. Carry out analysis using the dedicated peripheral. The state ofdata communication only enters active online mode duringUSB communication.
