99 Altos R5250 Installation Configuration GuideSUSE Linux Enterprise Server 10 EM64T Installation (withonboard SATA RAID)Below information describes how to manually install SUSE Linux EnterpriseServer 10 EM64T on Altos R5250 with onboard SATA RAIDDrivers RequiredFor SUSE Linux Enterprise Server 10 EM64T Installation, the following devicedrivers are required.Device Version Directory on EasyBUILDOnboard SATARAID9.37 \Disk\R5250\onboard\sataraid\x64\sles10\Onboard NVIDIANFP3600 ChipsetN/A OS built-inOnboard NVIDIAnForce NetworkingController0.62 \Disk\R5250\nic\Nvidia\x64\sles10\Onboard XGI Z9s 1.12.03 \Disk\r5250\onboard\xgiz9s\x64\sles10\ATI FireGL V5200 8.35.5 \Disk\R5250\graphic\V5200\x64\sles10\Software RequiredThe management utility of onboard SATA RAID can be found in the EasyBUILD8.0 build 100 (or later).Software Version Directory on EasyBUILDOnboard SATARAID Utility9.44 \app\R5250\onboard\sataraid\Linux\x64\sles10\Configuring onboard SATA RAID UtilityPlease refer to the Appendix A. for the Onboard SATA RAID Configuration.Installation Tips1. Since SUSE Linux Enterprise Server 10 EM64T cannot recognize theonboard SATA RAID, you need to make a driver diskette from theEasyBUILD 8.0 build 100 first before the installation.2. Boot the system form SUSE Linux Enterprise Server 10 EM64T Disk1bootable CD.3. When you see the boot menu on the screen, press F5 and select Yes.4. Press Enter to continue the installation.5. Insert the driver disk to the floppy, select sda: Floppy and OK to load theonboard SATA RAID driver from the driver diskette.6. After loading the driver, select OK and Back to return to the installation.7. If you have installed the ATI FireGL V5200 in the system, you need toinstall addition packages during the OS installation. If you are using
