49 Altos R5250 Installation Configuration Guide9. Please right-click on desktop and select Properties.10. Select Setting tab, Change the setting of Display to 1. Plug and PlayMonitor and ATI FireGL V5200 and click on Advanced.11. Select Troubleshoot tab, change the setting of the Hardware accelerationto Full and apply the setting. You will not see the message again.12. Checking the Device Manager, you would see ATI FireGL V5200 and ATIFireGL V5200 Secondary listed in Display adapters in Device Manager.RAID Utility Installation1. For installing the MegaRAID Storage Manager for the SAS daughterboard, please insert the EasyBUILD 8.0 build 100 (or later) into the opticaldrive.2. Expand Utilities -> Altos R5250 -> SAS Daughter Board, select MegaRAIDStorage Manger (Windows 2000) and click on Setup.3. Follow the instruction, accept the license agreement and use the defaultsetting to the Setup Type.4. At Setup Type, please select StandAlone.5. Follow the instruction again to complete the installation.Network Utility InstallationNOTE. ForceWare Network Access Manager only supports Microsoft InternetExplorer version 6.0 or later. If you want to use the ForceWare Network AccessManager with Windows 2000, you need to update the Microsoft InternetExplorer to version 6.0 or later.The ForceWare Network Access Manager is included in the chipset driverpackage. The ForceWare Network Access Manager will be installedautomatically when you installing the chipset driver package.Windows 2000 Advanced Server SP4 Installation (SAS RAIDdaughter board with i-Button)Below information describes how to manually install Windows 2000 AdvancedServer SP4 on Altos R5250 SAS RAID daughter board with i-Button.Drivers RequiredFor Windows 2000 Installation, the following device drivers are required.
