Altos R5250 Installation Configuration Guide 56Windows?” page, click on Next to continue the installation.7. Follow the instructions to finish the installation.Chipset Driver Installation1. Please insert the EasyBUILD 8.0 build 100 (or later) into the optical drive2. Expand Drivers -> Altos R5250 -> Chipset and double-click on WindowsVista x64.3. Follow the instruction and use the default setting to install all of thedrivers and utilities in the driver package.4. After all drivers and utilities are installed, please reboot the system.Gigabit Ethernet Driver InstallationThe Gigabit Ethernet driver is included in the chipset driver package. TheGigabit Ethernet driver would be installed automatically when you installingthe chipset driver package.RAID Utility Installation1. For installing the MegaRAID Storage Manager for the SAS daughterboard, please insert the EasyBUILD 8.0 build 100 (or later) into the opticaldrive.2. Expand Utilities -> Altos R5250 -> SAS DAUGHTER BOARD, selectMegaRAID Storage Manger (Windows Vista x64) and click on Setup.3. Follow the instruction, accept the license agreement and use the defaultsetting to the Setup Type.4. At Setup Type, please select StandAlone.5. Follow the instruction again to complete the installation.Windows Vista Enterprise x64 Edition Installation (SAS RAIDDaughter Board)Below information describes how to manually install Windows Vista Enterprisex64 Edition on Altos R5250 SAS RAID daughter board installed.Drivers RequiredFor Windows Vista x64 Installation, the following device drivers are required.Device Version Directory on EasyBUILDSAS RAID DaughterBoard09.25.1029.2007\Disk\r5250\raid\sas1068\x64\vista\Onboard NVIDIANFP3600 ChipsetPackage 1502 \Disk\R5250\onboard\Chipset\x64\vista\Onboard NVIDIAnForce Networking65.7.4.0 Including in chipset driver package1502
