Altos R5250 Installation Configuration Guide 34Network Utility InstallationThe ForceWare Network Access Manager is included in the chipset driverpackage. The ForceWare Network Access Manager will be installedautomatically when you installing the chipset driver package.Windows Server 2003 R2 Enterprise x64 Edition SP2 Installation(with onboard SATA RAID)Below information describes how to manually install Windows Server 2003 R2Enterprise x64 Edition on Altos R5250 with onboard SATA RAID.Drivers RequiredFor Windows 2003 x64 Installation, the following device drivers are required.Device Version Directory on EasyBUILDOnboard SATARAID5.10.2600.678 \Disk\R5250\onboard\sataraid\x64\ws03\Onboard NVIDIANFP 3600 ChipsetPackage 9.18 \Disk\R5250\onboard\Chipset\x64\ws03\Onboard NVIDIAnForce NetworkingController65.2.0.0 Including in chipset driver package9.18Onboard XGI Z9s 6.14.10.900 \Disk\r5250\onboard\xgiz9s\x64\ws03\ATI FireGL V5200 8.323.1.0 \Disk\R5250\graphic\V5200\x64\ws03\Software RequiredThe management utility for onboard SATA RAID and NIC can be found in theEasyBUILD 8.0 build 100 (or later).Software Version Directory on EasyBUILDOnboard SATARAID Utility5.10.2600.681Including in chipset driver package9.18ForceWare NetworkAccess Manager65.16 Including in chipset driver package9.18Configuring onboard SATA RAIDPlease refer to the Appendix A. for the onboard SATA RAID configuration.Installation Tips1. As Windows Server 2003 R2 x64 can’t recognize the onboard SATA RAID,you need to make a driver diskette from the EasyBUILD 8.0 build 100 firstbefore the installation.2. Press F6 at the beginning of installation for providing the driver diskettefor the onboard SATA RAID controller.3. You will see NVIDA RAID CLASS Driver (required) and NVIDIA nForceStorage Controller (required) listed. Please select both of them to install.
