Altos R5250 Installation Configuration Guide 52Software RequiredThe management utility for onboard SATA RAID and NIC can be found in theEasyBUILD 8.0 build 100 (or later).Software Version Directory on EasyBUILDOnboard SATARAID Utility5.10.2600.687Including in chipset driver package9.21ForceWare NetworkAccess Manager65.31 Including in chipset driver package9.21Configuring onboard SATA RAIDPlease refer to the Appendix A. for the onboard SATA RAID configuration.Installation Tips1. As Windows 2000 can’t recognize the onboard SATA RAID, you need tomake a driver diskette from the EasyBUILD 8.0 build 100 first before theinstallation.2. Press F6 at the beginning of installation for providing the driver diskettefor the onboard SATARAID.3. You will see NVIDA RAID CLASS Driver (required) and NVIDIA nForceStorage Controller (required) listed. Please select both of them to install.4. After loading the onboard SATA RAID driver from diskette, follow thenormal procedure to finish the installation.Chipset Driver InstallationThe chipset driver installation is the same as SAS daughter board installed.Please refer to the Windows 2000 Advanced Server SP4 Installation (SASDaughter Board) Chipset Driver Installation section.Gigabit Ethernet Driver InstallationThe Gigabit Ethernet driver is included in the chipset driver package. TheGigabit Ethernet driver would be installed automatically when you installingthe chipset driver package.VGA Driver Installation (onboard ZGI Z9s)The ZGI Z9s driver installation is the same as SAS daughter board installed.Please refer to the Windows 2000 Advanced Server SP4 Installation (SASDaughter Board) XGI Z9s Driver Installation section.VGA Driver Installation (ATI FireGL V5200)The ATI FireGL V5200 driver installation is the same as SAS daughter boardinstalled. Please refer to the Windows 2000 Advanced Server SP4 Installation(SAS Daughter Board) ATI FireGL V5200 Driver Installation section.
