81 Altos R5250 Installation Configuration Guide8.0 build 100 (or later) first before the installation.2. Type linux dd when the prompt boot: appears at the start.3. Please select the sda as the Driver Disk Source.4. Follow the instruction to load the driver for SAS RAID daughter boardfrom the driver diskette.5. When installing MSM (MegaRAID Storage Manager) for SAS RAIDdaughter board after installation complted OR if you have installed theATI FireGL V5200 in the system, you are required to manually toselect/install additional package at the Package Installation Defaults.6. At the Package Installation Defaults, select Customize software packagesto be installed and click Next.7. At the Package Group Selection step, hold the shift key to select all thelisted packages in the right pane under Development, and right click onall the items you just selected and then click “Select all optionalpackages”.8. After selecting the entire package under Development, click Next tofollow the normal procedure to finish the installation.Gigabit Ethernet Driver InstallationThe Gigabit Ethernet driver installation is the same as SAS daughter boardinstalled. Please refer to the Red Hat Enterprise Linux 5.0 EM64T Installation(SAS Daughter Board) Gigabit Ethernet Driver Installation section.VGA Driver Installation (onboard XGI Z9s)The XGI Z9s driver installation is the same as SAS daughter board installed.Please refer to the Red Hat Enterprise Linux 5.0 EM64T Installation (SASDaughter Board) XGI Z9s Driver Installation section.VGA Driver Installation (ATI FireGL V5200)TBDRAID Utility Installation1. You can find the MegaRAID Storage Manager for SAS RAID daughterboard in EasyBUILD 8.0 build 100. Please refer to Directory on EasyBUILDin Software Required section for the utility and copy it from theEasyBUILD 8.0 build 100 to HDD first.# mount /media/cdrom# cp –R /media/cdrom/app/r5250/raid/lsi1068/Linux/. /tmp2. Install MegaRAID Storage Manager# cd /tmp/
