4-2RAIDUTIL Command Line UtilityExit StatusRAIDUTIL exits with either of the following error status indications:Device Address SyntaxWhen you use RAIDUTIL to specify a device or group of devices,use an address of the form dDbBtTdD, whereTo list all devices on a particular bus, specify only dDbB. To list alldevices on a controller, specify only dD. To display deviceinformation, use the List (- L) command. Always separate driveaddresses with a comma.0 Error-free termination1 Error termination (the message log contains the errorinformation)D Controller ID.B Controller channel (or bus) number of the bus to whichthe disks are attached. The range is 0 – 7.T Always 0.D the second “D”—Always zero.
