A-6SNMPThe Windows components can be installed directly from theCD-ROM or a from a disk you create from the CD-ROM. Thecomponents are as follows: Adaptec event logger SNMP event logger extensions Adaptec SNMP subagent Adaptec MIBSystem RequirementsThe Adaptec SNMP software supports all Adaptec RAID controllersand has the following system requirements: The TCP/IP network protocol must be enabled on yoursystem. Refer to your operating system documentation forinformation about installing the TCP/IP protocol. The SNMP service for your operating system must beinstalled.Management ConsolesThe Adaptec SNMP agent conforms to the SNMP Version 1specification. Adaptec has developed and tested this feature to workwith various operating systems that provide built-in SNMPcapability.Windows supports controller management from an SNMPmanagement console.Installing Adaptec SNMP SupportThe following topics describe how to install Adaptec SNMPsoftware and SNMP support for Windows.Note: Ensure that your operating system has SNMP supportenabled before installing the Adaptec SNMP software.
