3-34Storage ManagerSaving the Subsystem ConfigurationThe Storage Manager File menu has the following options:Note: If you reset the NVRAM on the controller, any changesto your controller parameters return to the factory defaults.Write-through Writes all data to disk for each Write commandbefore Command Complete status is returnedto the host. The data can also be cached forsubsequent read commands.Defaults Click to revert to the default setting.Cancel Click to exit this window without savingchanges.OK Click to exit with changes.Read SystemConfigurationReads the current hardware configuration. Anycurrent changes not saved are lost.Set SystemConfigurationSaves changes that you made to the storagesubsystem configuration. If any arrays havebeen created or modified, this action causes thecontroller to start build operations for the newarrays.Load ConfigurationFileLoads a previously saved configuration intoStorage Manager and apply it to the currenthardware.Save ConfigurationFileSaves the current configuration, or any changesto that configuration, to a file for later use.Allows storage subsystems to be configured forother machines with like drives.
