11-34Adaptec SCSI RAID Software Reference GuideExamplesThe following example displays the status of all device slots onenclosure management devices 0 and 1:AAC0>enclosure show slotExecuting: enclosure show slotEnclosure Slot scsiId Insert Status--------- ---- ------ ------- -----------------------------------0 0 0:00:0 4 OK0 1 0:01:0 0 UNCONFIG0 2 0:10:0 0 UNCONFIG0 3 0:03:0 0 UNCONFIG0 4 0:04:0 0 UNCONFIG1 0 1:00:0 0 UNCONFIG1 1 1:01:0 0 UNCONFIG1 2 1:10:0 0 UNCONFIG1 3 1:03:0 0 UNCONFIG1 4 1:04:0 0 UNCONFIGAs the example shows, the device slot status display contains thefollowing columns:■ Enclosure■ Slot■ scsiId■ Insert■ StatusThe following sections describe the information that the enclosureshow slot command can display in these columns.The Enclosure and Slot ColumnsThe Enclosure column displays the ID associated with the enclosuremanagement device that you specified on the command line. If youdid not specify an ID, the enclosure show slot commanddisplays the IDs for all enclosure management devices connected tothe controller. In the example, the enclosure show slotcommand displays enclosure management device IDs 0 and 1.The Slot column displays the unit number associated with thedevice slot that you specified on the command line. If you did notspecify a unit number, the enclosure show slot commanddisplays the unit numbers for all device slots on the enclosuremanagement device or devices. In the example, the enclosure