5-12Adaptec SCSI RAID Software Reference GuideDr Label Type Size Ctr Size Usage C:ID:L Offset:Size-- ----- ------ ------ --- ------ ------- ------ -------------F: 0 Volume 30M NTFS63 Mirror 15MB 0:02:0 64.0KB: 15.0MB0:04:0 64.0KB: 15.0MB62 Mirror 15MB 0:03:0 64.0KB: 15.0MB0:05:0 64.0KB: 15.0MBThe following list describes the change to the display as the result ofcreating a multilevel array of mirror sets with the containercreate mmirror command:■ The Dr column is blank to indicate that the newly createdmirror sets (63 and 62) do not have a drive letter assigned tothem.■ The Type column displays Mirror for arrays 63 and 62 toindicate that the underlying arrays are mirror sets.■ The State column displays the state of the arrays, which in thisexample are all in the Normal state.Note that this column appears only if you specify the /fullswitch with the container list command.■ The Scsi C:ID:L column displays the SCSI device ID for thedisk(s) on which the underlying mirror set(s) reside. In theexample, mirror set 63 resides on disk 0:02:0 and 0:04:0. Mirrorset 62 resides on disk 0:03:0 and 0:05:0.■ The Partition Offset:Size column displays the partitionoffset(s) and size(s) for the underlying mirror set(s). In theexample mirror set 63 and 62 have partition offsets of 64.0 KBand sizes of 15.0 MB.If a partition is dead, the “:” (colon) in the Partition Offset:Sizecolumn changes to a “!” (exclamation point). See the diskremove dead_partitions (page 7-9) command formore information on dead partitions.Related Informationcontainer commands:■ container create mirror (page 5-5)■ container list (page 5-54)■ container promote (page 5-69)
