3-11Syntax and Conventions for CLI CommandsThe Func ItemThe Func item displays the type of task running on the controller.Table 3-7 describes the values that the Func item can display.Table 3-7. Function ValuesValue MeaningFSV File system verify task.FSX File system extend task. The array extend mvolume andarray extend volume commands cause the FSX value todisplay.FTF array format task with a FAT file system specified. The arrayformat command with the /file_system switch set toFAT causes the FTF value to display.MCR Mirror set create or multilevel mirror set create task. Thearray create mirror and array create mmirrorcommands cause the MCR value to display.MMR Merge a broken mirror task.The array merge command causes the MMR value todisplay.MSC array scrub task. The array scrub command causes theMSC value to display.NTF array format task with an NTFS file system specified. Thearray format command with the /file_system switchset to NTFS causes the NTF value to display.R5R RAID-5 rebuild task.R5S RAID-5 set create task with the scrub method specified. Thearray create raid5 command with the /scrub switchspecified causes the R5S value to display.RCF array reconfigure task. The array reconfigure commandcauses the RCF value to display.SCV Verify all blocks on a SCSI disk device task. The diskverify command causes the SCV value to display.SCZ Clear an entire SCSI disk task. The disk zero commandcauses the SCZ value to display.SVR Verify all blocks and repair bad blocks on a SCSI disk devicetask. The disk verify command with the /repair switchcauses the SVR value to display.
