VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1AddPac Technology Co., Ltd. - 120 -4.13.4. Configuration File의 Backup 및 RestoreThe AP1100 Gateway saves the configuration file in the flash memory of theGateway. However, sometimes it is necessary to back up the configurationfile or restore the backed up configuration file. This chapter describes how toback up or restore the configuration file and related commands. Backup andrestoring procedures of the configuration file are same as upgrade andbackup procedures of software image. However, the configuration file name isGateway.cfg. The configuration file is backed up or restored through FTP/TFTP.When restoring is completed, “Config Database is updated” message isdisplayed in the screen. When backing up the configuration file, use “get”command, and when restoring the configuration file, use “put” command.The following is an example of backup and restore of configuration informationthrough TFTP.[Example] Software Backup through FTP155 sun10:#> ftp 211.170.87.221Connected to 211.170.87.221.220 Gateway FTP server (Version 1.12) ready.Name (211.170.87.221:noname): root331 Password required for root.Password:230 User root logged in ok.ftp> bi200 Type set to I.ftp> get Gateway.cfg200 PORT command successful.150 BINARY data connection for Gateway.cfg (211.170.87.99,44100).226 BINARY Transfer complete.local: Gateway.cfg remote: Gateway.cfg2016 bytes received in 0.0 seconds (375.13 Kbytes/s)ftp> quit
