VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1AddPac Technology Co., Ltd. - 155 -5.4. Configuration Voice Ports5.4.1. Configuration Voice Ports on the AP1100 GatewayIn general, voice port commands define the characteristics associated with aparticular voice port signaling type. Under most circumstances, the defaultvoice port command values are adequate to configure FXO and FXS ports totransport voice data over your existing IP network.5.4.2. Voice Ports Configuration Task List and Steps5.4.2.1. Configuring FXS or FXO Voice PortsUnder most circumstances the default voice port values are adequate for bothFXO and FXS voice ports. If you need to change the default configuration forthese voice ports, perform the following tasks. The first two tasks are required;the third task is optional.1) Identify the voice port and enter the voice-port configuration mode.2) Configure the following mandatory voice-port parameters.3) Configure one or more of the following optional voice-port parameters.¾ PLAR(Private Line Auto Ringdown) 연결 모드¾ Description¾ Ring Number¾ Input Gain¾ Output GainStep Command Description1 configure Enter global configuration mode.2 voice-portlocation Identify the voice port you want to configure andenter voice-port configuration mode.3 ring numbernumber (For FXO ports only) Specify the maximum number ofrings to be detected before answering a call.4 connection plarstring (Optional) Specify the private line auto ringdown
