VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1AddPac Technology Co., Ltd. - 206 -5.7.4. Dial Peer Commands5.7.4.1. answer-addressTo find the VoIP dial peer for the VoIP inbound call incoming to the network asusing the calling party number of the inbound call, use “answer-address”command in the dial-peer setup mode. To disable the number that has beenset, use “no” command before “answer-address” command.answer-address stringno answer-address5.7.4.1.1. SyntaxKeyword / Argument DescriptionString Number string defined in the E.164 or privatetelephone number plan. Numeric data (0 to 9)“#” and “*” can be used.z (*) & (#): These characters can be found on thestandard button-type telephone. They cannotbe located at the first place of the string. (Forexample, *650 is invalid.)z (.): The period means a value that can matchwith any numeric entered. In other words, theperiod cannot be placed at the first place ofthe string. (For example, .650 is invalid.)z ([]): Brackets are to indicate the range. TheRange is the character sequence within thebracket and only numeric data (0 to 9) can beused for the range. This is similar to the regularexpression rule.5.7.4.1.2. Default ValueThe default is null string.5.7.4.1.3. Command ModeDial-peer setup mode (VoIP dial peer)5.7.4.1.4. Usage GuidelineThis command is applied to the VoIP dial peer of the AP1100 VoIP Gateway.
