VoiceFinder AP1100 VoIP Gateway User’s Guide Version 1.1AddPac Technology Co., Ltd. - 154 -5.3.7.3. Applying Translation Rules to the Inbound VoIP CallsTo apply the translation rule set to all calls received from the network, makefollowing setting.Step Command Description1 Router# configure Enters into the global configurationmode.2 Router(config)# voice service VoIP Enters into the voice service VoIPsetup mode.3 Router(vservice-VoIP)#translate-VoIP-incoming {called-number |calling-number}tagcalled-number: Applies thetranslation rule to the inbound calledparty.calling-number: Applies thetranslation rule to the inbound callingparty number.The tag refers to the rule set and tagvalues range from 0 to 65535.5.3.7.4. Applying Translation Rules to the Outbound CallsTo apply the translation rule set to the outbound calls going to a certain dialpeer (POTS peer or VoIP peer) make following setting.Step Command Description1 Router# configure Enters into the global configurationmode.2 Router(config)# dial-peer voicetag { pots |VoIP }Enters into the dial-peer configurationmode.The tag is the only identifier of thedial-peer of this system, and tagvalues include 0 ~ 65535.3 Router(dial-peer-config)# translate-outgoing{called-number | calling-number}tagcalled-number: Applies thetranslation rule to the outboundcalled party number.calling-number: Applies thetranslation rule to the outboundcalling party number.The tag refers to the rule set and tagvalues range from 0 to 65535.
