97 V6.70 201310177 Viewing from Front Panel7.1 View Scrolling DisplayThe temperature & time display will be the first display you see upon power up.Date, time, and temperature are updated when fresh data is available. Thedisplay will continuously scroll through a set sequence. The sequence willdepend on the number of liquid temperature probe channels and if the unit isequipped to measure calculated winding temperature. Automatic scrolling can beinterrupted at any time by pressing the YES button. Once automatic scrolling isstopped, pressing the or arrow buttons will permit manual scrolling to thevarious displays. To resume automatic scrolling, press the NO button.NOTE: The unit will return to the automatic scrolling from any menu afterone minute of inactivity. Activity is defined as any button being pressed.There can be many different display sequences depending on the optionsinstalled as well as the settings of those options. The sequence of the display isas shown in Table 7.1, the standard items are always displayed and the options ifselected and the item in the “Requirements” column is present in the controller7.2 Reset Min/MaxThe minimum and maximum registers may be reset by pressing the YES buttonwhen the display is showing:To confirm that the min/max values are reset, the display will read:New data will be recorded as soon as the data is ready.RST MIN/MAXP U S H Y E S T O R S TMIN/MAX IS RST
