76 V6.70 20131017Press the YES button. The 10’s month digit will flash. Use the or arrowbuttons to set this digit. Use the button to move to the 1’s month digit andobserve that it flashes. Again use the or arrow buttons to set this digit. Usethe button to move to the day and year digits and set them using the orarrow buttons.4.14.2 Setting Time and Date Via the PCFor setting time from a PC just type the current time on the “Enter:” line asfollows:Enter:170/08:05This will set the time to 8:05AM. The time entered must be a 4 digit internationaltime.For setting the date from a PC just type the current date on the “Enter” line asfollows:Enter:171/07/28/08This will set the date to July 28, 2008. The date must be entered with a total 6digits. A date entered of 5/3/08 will not register correctly. The correct entry forMay 3, 2008 is:Enter:171/05/03/084.15 Setting PasswordA four digit password can be entered to restrict access to programming settings,downloading of setting files, and downloading of firmware upgrades. The superuser password of 0905 is permanently recorded and cannot be changed.Programming from the front panel, press the or arrow buttons until the setting184 is displayed:Press the YES button. The first digit will flash. Use the or arrow buttons toscroll through the digits 0 – 9. Use the or buttons to scroll between thedigits. The currently active digit will flash. Press YES after you have entered allfour digits.PRGM SETTING 184PASSWORD=0000
