Manuals database logo
manualsdatabase
Your AI-powered manual search engine

Advanced Power technologies TTC-1000 manuals

TTC-1000 first page preview

TTC-1000

Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. INTRODUCTION
  7. PRODUCT DESCRIPTION
  8. Connection Overview
  9. Specifications
  10. Part Number Details
  11. INSTALLATION and CONNECTIONS
  12. Figure 3.2: NEMA 4X Mounting
  13. Power Hookup
  14. TTC-PROBE-01 Installation
  15. TTC-PROBE-11 Installation
  16. Figure 3.7: Magnetic Mount, Application of Thermal Compound
  17. Figure 3.8: Magnetic Mount, Side View
  18. Probe Lead Connections
  19. Figure 3.10: Probe Connections
  20. Auxiliary CT Input for Calculated Winding Temperature
  21. Cooling Control and Condition Alarm Connections
  22. Unit Alarm Connections
  23. Telemetry Connections
  24. Analog Outputs
  25. Figure 3.18: Location of J2 RS-485 Bus Termination Jumper
  26. Optically Isolated Inputs
  27. Heater Connections
  28. SETTINGS
  29. Settings for Calculated Winding Temperature
  30. CT RATIO
  31. Rated Load
  32. Winding Rise Time Constant
  33. Checking Winding Temperature
  34. Temperature Set Points
  35. Figure 4.1: Over Temperature Operation
  36. Figure 4.2: Under Temp Operation
  37. Setting Liquid Pickup and Drop Out Temperatures
  38. Setting Calculated Winding Pickup and Drop Out Temperatures
  39. LTC Condition Monitoring
  40. Setting LTCDIFF Set Point
  41. Setting LTCDIFF Pickup Timer
  42. Figure 4.4: Load Pickup Set Point Operation
  43. Setting Load Pickup Set Point
  44. Setting Load Pickup Timer
  45. Figure 4.5: Input Set for LEVEL
  46. Programmable Logic Settings
  47. Assigning Liquid Temperature Set Points
  48. Assigning Winding Temperature Set Points
  49. Assigning LTCDIFF for LTC Condition Monitoring Alarm
  50. Assigning Load Pickup Set Points
  51. Assigning IN1 and IN2
  52. Assigning OUT1, OUT2, OUT3 and OUT4
  53. Time Set Points
  54. Setting Output Timers
  55. Application Examples
  56. Setting Output Control With Alarm
  57. Alternate Fan Banks
  58. Auto and Manual Control
  59. Setting Control of Unit Alarm
  60. Device Alarm Setting
  61. Manual Mode Alarm Setting
  62. Setting Date and Time
  63. Setting Time and Date Via the Front Panel
  64. Setting Time and Date Via the PC
  65. TELEMETRY OPTIONS
  66. Setting BAUD Rate
  67. Setting Remote Blocking
  68. VIEW TEMPERATURES
  69. Dual Probe
  70. Three Probe
  71. Single Probe With Calculated Winding
  72. Dual Probe With Calculated Winding
  73. Reset Min/Max
  74. VIEW SETTINGS
  75. STATUS
  76. SETTING FILES
  77. Upload Settings Using Procomm
  78. Download Setting Files
  79. Download Settings Using Procomm
  80. DATA LOGGING
  81. Data Points
  82. Selecting Data Points
  83. Add or Delete P3 From Log
  84. Add or Delete Load From Log
  85. Retrieving Data Log
  86. Saving the Data Log as a Text File Using HyperTerminal
  87. Saving the Data Log as a Text File Using ProComm
  88. Import to Excel
  89. DOWNLOAD PROGRAM UPDATES
  90. Download Firmware Using HyperTerminal
  91. Download Firmware Using Procomm
  92. SETTINGS WORKSHEETS
  93. Front Panel Setting Sheets
  94. PC Setting Sheets
  95. DNP3.0 PROFILE DOCUMENT
TTC-1000 first page preview

TTC-1000

Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. Table Of Contents
  9. INTRODUCTION
  10. PRODUCT DESCRIPTION
  11. Connection Overview- Panel Mount Unit
  12. Rear Layout- Panel Mount Unit
  13. Connections Overview - NEMA Enclosure
  14. Rear Panel Layout- NEMA Enclosure
  15. Specifications
  16. Part Number Details
  17. INSTALLATION and CONNECTIONS
  18. Power Hookup
  19. Temperature Probes
  20. TTC-PROBE-11 Installation
  21. Magnetic Mount Probe (TTC-PROBE-02) Installation
  22. Probe Lead Connections
  23. Figure 3.9a: NEMA Connections
  24. Applying a Backup Temperature Probe
  25. Figure 3.12a: NEMA CT Connections
  26. Cooling Control and Condition Alarm Connections
  27. Unit Alarm Connections
  28. Telemetry Connections
  29. Figure 3.15a: TB5 Connections to Plug-In Analog Output Module
  30. RS-485 for DNP3.0 or MODBUS Communications
  31. Fiber Optic Interface for DNP3.0 or MODBUS Communications
  32. Figure 3.17: Outline of Fiber Optic Interface
  33. Setting Repeat Mode on Fiber Optic Channel
  34. Optically Isolated Inputs
  35. Heater Connections
  36. SETTINGS
  37. Programming Settings Through a PC
  38. Firmware Version from the Front Panel
  39. CT RATIO
  40. Hot Spot Rise over Top Oil
  41. Calculated Winding Exponent Setting
  42. Probe Names
  43. Setting Winding Names
  44. Setting Load Names
  45. Temperature Set Points
  46. Figure 4.2: Under Temp Operation
  47. Setting Liquid Pickup and Drop Out Temperatures
  48. Setting Calculated Winding Pickup and Dropout Temperatures
  49. Load Pickup Set Points
  50. Figure 4.3: Load Pickup Set Point Operation
  51. Setting Load Pickup Set Point
  52. Setting Load Pickup Timer
  53. Figure 4.4: Input Set for LEVEL
  54. Programmable Logic Settings
  55. Assigning Liquid Temperature Set Points
  56. Assigning Winding Temperature Set Points
  57. Assigning Load Pickup Set Points
  58. Assigning IN1 through IN14
  59. Assigning Outputs
  60. Time Set Points
  61. Time Set Point Settings
  62. Time Set Point Counter Settings
  63. Setting Output Invert
  64. Application Examples
  65. Commanding the cooling fans
  66. Periodic exercise of cooling fans
  67. Setting Output Control With Alarm
  68. Alternate Fan Banks
  69. Auto and Manual Control
  70. Setting Control of Unit Alarm
  71. Temperature Probe Alarm Setting
  72. Manual Mode Alarm Setting
  73. Setting Date and Time
  74. Setting Time and Date Via the PC
  75. Setting Unit ID
  76. TAP CHANGER POSITION MONITORING (TPM)
  77. Full Configuration
  78. Programming Items
  79. TLIM
  80. Offtap, Raise and Lower Inputs
  81. Tap Info
  82. Configuring TPM Settings through RS232 on PC
  83. Tap Changer Position Monitoring Targets
  84. Dual Algorithm LTC Condition Monitoring
  85. Detection of Slowly Evolving Problems
  86. Setting LTCDIFF Set Point
  87. Setting LTCDIFF Pickup Timer
  88. Detection of Quickly Evolving Problems
  89. Setting LTCDIFF Rise
  90. TELEMETRY OPTIONS
  91. Table 7.1: Tap Position Analog Ranges
  92. Setting the Analog Output Range
  93. Setting the Analog Source
  94. Enabling Negative Scaling
  95. Setting BAUD Rate
  96. Setting NODE Address
  97. Setting Remote Blocking
  98. VIEW TEMPERATURES
  99. Table 8.1: Display Scroll Sequence
  100. Reset LTCDIFF Rate of Rise
  101. View Settings
  102. View Settings Via PC
  103. STATUS
  104. SETTING FILES
  105. Upload Settings Using HyperAccess
  106. Download Setting Files
  107. Download Settings Using HyperAccess
  108. Download Settings Using a *.csv Template With HyperAccess
  109. DATA LOGGING
  110. Data Points
  111. Selecting Data Points
  112. Add or Delete P3 From Log
  113. Add or Delete Load1 From Log
  114. Viewing the Data Log
  115. Import Data Log Using HyperTerminal
  116. Import to Excel
  117. DOWNLOAD PROGRAM UPDATES
  118. Download Firmware Using HyperTerminal
  119. Download Firmware HyperAccess
  120. FRONT PANEL SETTINGS WORKSHEETS
  121. CFG MENU FRONT PANEL SETTINGS WORKSHEET
  122. TPM MENU FRONT PANEL SETTINGS WORKSHEET
  123. PC SETTINGS WORKSHEETS
  124. CONFIGURATION MENU SETTINGS WORKSHEET
  125. DIGITAL INPUTS AND TAP POSITION MONITOR WORKSHEET
  126. Creating Setting Using an Excel CSV file
  127. DNP3.0 PROFILE DOCUMENTS and TTC-1000 DATA MAPS
  128. TTC-1000 Data Map
  129. MODBUS RTU POINT MAP
TTC-1000 first page preview

TTC-1000

Table of contents
  1. Table Of Contents
  2. Table Of Contents
  3. Table Of Contents
  4. Table Of Contents
  5. Table Of Contents
  6. Table Of Contents
  7. Table Of Contents
  8. INTRODUCTION
  9. PRODUCT DESCRIPTION
  10. Connection Overview- Panel Mount Unit
  11. Rear Layout- Panel Mount Unit
  12. Connections Overview - NEMA Enclosure
  13. Rear Panel Layout- NEMA Enclosure
  14. Specifications
  15. Part Number Details
  16. INSTALLATION and CONNECTIONS
  17. Power Hookup
  18. Temperature Probes
  19. TTC-PROBE-11 Installation
  20. Magnetic Mount Probe (TTC-PROBE-02) Installation
  21. Probe Lead Connections
  22. Figure 3.9a: NEMA Connections
  23. Applying a Backup Temperature Probe
  24. Figure 3.12a: NEMA CT Connections
  25. Cooling Control and Condition Alarm Connections
  26. Unit Alarm Connections
  27. Telemetry Connections
  28. Figure 3.15b: TB5 Connections to Plug-In Analog Output Module
  29. RS-485 for DNP3.0 or MODBUS Communications
  30. Fiber Optic Interface for DNP3.0 or MODBUS Communications
  31. Setting Repeat Mode on Fiber Optic Channel
  32. Optically Isolated Inputs
  33. Heater Connections
  34. SETTINGS
  35. Programming Settings Through a PC
  36. Firmware Version from the Front Panel
  37. CT RATIO
  38. Rated Load
  39. Hot Spot Rise over Top Oil
  40. Calculated Winding Exponent Setting
  41. Probe Names
  42. Temperature Set Points
  43. Figure 4.2: Under Temp Operation
  44. Setting Liquid Pickup and Drop Out Temperatures
  45. Setting Calculated Winding Pickup and Dropout Temperatures
  46. Load Pickup Set Points
  47. Figure 4.3: Load Pickup Set Point Operation
  48. Setting Load Pickup Set Point
  49. Setting Load Pickup Timer
  50. Figure 4.4: Input Set for LEVEL
  51. Programmable Logic Settings
  52. Assigning Liquid Temperature Set Points
  53. Assigning Winding Temperature Set Points
  54. Assigning Load Pickup Set Points
  55. Assigning IN1 through IN14
  56. Assigning Outputs
  57. Time Set Points
  58. Time Set Point Counter Settings
  59. Setting Delay Before Pickup or One-Shot
  60. Setting Output Invert
  61. Application Examples
  62. Periodic exercise of cooling fans
  63. Setting Output Control With Alarm
  64. Alternate Fan Banks
  65. Auto and Manual Control
  66. Setting Control of Unit Alarm
  67. Temperature Probe Alarm Setting
  68. Winding Circuit Alarm Setting
  69. Setting Date and Time
  70. Setting Time and Date Via the PC
  71. Setting Unit ID
  72. Dual Algorithm LTC Condition Monitoring
  73. Detection of Slowly Evolving Problems
  74. Setting LTCDIFF Set Point
  75. Setting LTCDIFF Pickup Timer
  76. Detection of Quickly Evolving Problems
  77. Setting LTCDIFF Rise
  78. TELEMETRY OPTIONS
  79. Setting the Analog Output Range
  80. Enabling Negative Scaling
  81. DNP3.0 and MODBUS
  82. Setting BAUD Rate
  83. Setting Remote Blocking
  84. Telemetry Via RS232
  85. Viewing from Front Panel
  86. Reset LTCDIFF Rate of Rise
  87. View Settings
  88. STATUS
  89. SETTING FILES
  90. Upload Settings Using HyperAccess
  91. Download Setting Files
  92. Download Settings Using HyperAccess
  93. Download Settings Using a *.csv Template With HyperTerminal
  94. DATA LOGGING
  95. Data Points
  96. Add or Delete P1 From Log
  97. Add or Delete P3 From Log
  98. Viewing the Data Log
  99. Saving Data Log as Comma Delimited File Using HyperTerminal
  100. Import to Excel
  101. DOWNLOAD PROGRAM UPDATES
  102. Download Firmware Using HyperTerminal
  103. Download Firmware HyperAccess
  104. FRONT PANEL SETTINGS WORKSHEETS
  105. PC SETTINGS WORKSHEETS
  106. Creating Setting using an Excel CSV file
  107. DNP3.0 PROFILE DOCUMENTS and TTC-1000 DATA MAPS
  108. TTC-1000 Data Map
  109. MODBUS RTU POINT MAP
Advanced Power technologies categories
More Advanced Power technologies categories
Manuals database logo
manualsdatabase
Your AI-powered manual search engine