109 V6.70 2013101710.2.3 Download Settings Using a *.csv Template With HyperTerminalThe TTC-1000 will accept setting downloads from a *.csv file (comma separatedvalue file). A Microsoft Excel setting template can be obtained from the factory,or from www.advpowertech.com. Simply fill in the setting values using MS Excel.NOTE: When using the setting templates you must set Macro Security tothe Low setting. To access Macro Security, click Tools then Options andclick on the Security tab. Click Macro Security… and click the SecurityLevel tab and select the Low setting then OK. Close and re-open MS Excel.When you’re done, save the file to a *.csv formatted file by clicking on the buttontitled “Save As a CSV File”. The settings template will automatically create thedownloadable *.csv file in a directory that you specify.1. Press Enter to display the TTC-1000 Main Menu2. Type 6 followed by / followed by the 4 digit password:a. Note that at any time the internal data in the unit is to be changed,the password will need to be entered.3. The screen will display the following message, which indicates that theTTC-1000 is ready to accept the CSV settings file.CSV FILE TRANSFER IN PROGRESS. PRESS Any KEY TOABORT”. §§§§§§§§§§§§§§4. To send the file to the TTC-1000, click on Transfer on the HyperTerminaltoolbara. A drop down menu will appearb. Click on the Send File option5. A dialog box will open to select the location and name of the file to betransferred.a. Make sure Xmodem is selected in the Protocol windowb. Click on Browse to select the directory and then the file to be sent.c. The Send button will now be selectable, click on it.6. A dialog box will appear to track the transfer progress.The dialog box will disappear and a note will appear in the terminal window that thetransfer was successful.NOTE: The TTC-1000 has the ability to detect if a wrong setting file after thefile is received. A message “WRONG FILE” will appear if the setting file isincorrect for the firmware version of the TTC-1000. This will usually occur ifa CSV file is created from the wrong setting template or the CSV file isaltered incorrectly prior to downloading.10.2.4 Download Settings Using a *.csv Template With HyperAccessThe procedure to download a setting file is as follows:
