Section 6: Setting Up - NetWare AXIS 5470e/570/670e User’s Manual110Section 6 Setting Up - NetWareThis section describes how to continue the installation of the AXIS5470e/570/670e in the NetWare environment. Identify whichtransport protocol you are running on your network and whichinstallation method you should use. Continue the installation byselecting the appropriate installation instructions from the tablebelow:If you intend to operate your AXIS 5470e/570/670e in a multi-protocol, mixed environment, you should also proceed to the otherrelevant sections in this manual, namely:Section 7 Setting Up - Windows, on page 125Section 8 Setting Up - OS/2, on page 151Section 9 Setting Up - Macintosh, on page 157Section 10 Setting Up - UNIX, on page 163Section 12 IPP (Internet Printing Protocol), on page 203InstallationmethodTransportprotocol ActionNDPS TCP/IPIPX/SPXSee Setup using NDPS, on page 111Proceed with Installing the AXIS 5470e/570/670e in NDPS environments, onpage 111.Queue basedprintingIPX/SPX See Basic Setup with AXIS NetPilot, on page 114IPX/SPXAdvancedconfigurationIf you need a more advanced installation that is not covered by the AXIS NetPilotInstallation Wizard, continue with Advanced Installation using AXIS NetPilot,on page 117.Pure IP See Basic Queue-based printing (Pure IP), on page 120
