AXIS 5470e/570/670e User’s Manual Section 6: Setting Up - NetWare 111Setup using NDPSThe AXIS 5470e/570/670e supports Novell Distributed Print Services(NDPS), which is Novell’s new generation architecture for printingand printer administration. You can run NDPS over Pure IP(TCP/IP) or IPX/SPX.Before the AXIS 5470e/570/670e can be installed, make sure thatNDPS is installed and a Broker is loaded on your NetWare file server.AXIS 5470e/570/670e uses the AXIS NDPS Gateway for printing innetworks using either IP or IPX as transport protocols. The printergateways are included with the NDPS software and are automaticallyinstalled together with NDPS.Notes:Installing the AXIS 5470e/570/670e in NDPS environmentsHaving assigned an IP address to the AXIS 5470e/570/670e asdescribed in Assigning an IP address, on page 32, you are now readyto install the AXIS 5470e/570/670e for NDPS printing. You canselect to install the connected printers as public or controlled accessprinters. Follow the instructions below to install the AXIS5470e/570/670e using NDPS:Notes:• NDPS requires that you are running NetWare 4.11 or higher.• Pure IP is only supported by NetWare 5 or higher.• The HP-JETADMIN parameter of the AXIS 5470e/570/670e must be set toYES in order for the communication between the AXIS 5470e/570/670e andthe NDPS gateway to be enabled.• If you do not have an NDPS Manager object available, start out with creatingone in the NetWare Administrator.• If the PSERVER_NDS parameter includes the name of a tree and not aspecific file server, RCONAG6.NLM must be running on at least one fileserver in the specified tree.
