AXIS 5470e/570/670e User’s Manual Appendix F: IPDS Overview 271PostScriptoutput bin settingsThese parameters are for mapping the IPDS bin numbers to the binnumbers of the connected postscript printer.IPDS PCLConfigurationClick the IPDS PCL Driver Settings tab and enter the configurationsettings for the parameters as described below. When you are finished,click OK at the bottom of the page to save your settings to the printsever.Language version Select the correct PCL language version depending on your connectedprinter.Symbol set Select the preferred symbol set from the drop-down list. The defaultand recommended value is AUTOMATIC. The print server willautomatically select the appropriate symbol set.PCL bin 1-5 Define the positioning by setting the parameters Horizontal Offsetand Vertical Offset to the desired values.PCL Output Bin These parameters are for mapping the IPDS bin numbers to the binnumbers of the connected PCL printer.IPDS FontsThis section describes how IPDS fonts are handled by the AXIS5470e/570/670e. There are two different approaches to font handling:• downloading fonts from the host.• using fonts that are already resident in the printer.Both methods are supported by the AXIS 5470e/570/670e.
