Section 6: Setting Up - NetWare AXIS 5470e/570/670e User’s Manual1209. Select an appropriate NetWare Print Server name, that will beassociated with the AXIS 5470e/570/670e print server, by usingthe Browse... button.Notes:10. If you want to define a remote printer number slot manually,check the Manual box and type the desired number in the box.11. Click the OK button to return to the Network Environmentswindow.Basic Queue-based printing (Pure IP)Axis print servers with software version 6.0 or later allow users to printin a Pure IP environment using traditional queue-based printing(which usually uses the IPX transport protocol). If you prefer usingNDPS as your printing method, please refer to Setup using NDPS, onpage 111.In the NetWare Pure IP environment, you must use NetWareAdministrator to create the printer, print server and queue objects.Installing theAXIS 5470e/570/670eFollow the instructions below to install the AXIS 5470e/570/670e inthe NetWare Pure IP environment:1. Start the Configuration Wizard for general setup from the Usermode in the AXIS 5470e/570/670e Web interface.2. Click your way through the Wizard until you reach the NetWarepage.• You cannot type or edit the name manually.• Make sure that you have PSERVER.NLM running if you selected RemotePrinter Mode in step 8.
