Section 7: Setting Up - Windows AXIS 5470e/570/670e User’s Manual126If you intend to use the AXIS 5470e/570/670e in a multiprotocolenvironment, you should also refer to the following sections:Section 6 Setting Up - NetWare, on page 110Section 8 Setting Up - OS/2, on page 151Section 9 Setting Up - Macintosh, on page 157Section 10 Setting Up - UNIX, on page 163Section 12 IPP (Internet Printing Protocol), on page 203AXIS Print System OverviewNote:AXIS Print System is the recommended tool to use for networkprinting in Windows 95, Windows 98, Windows NT 4.0 andWindows 2000. AXIS Print System allows Axis Network Print Serversto be connected in the same simple fashion as a local printer port.AXIS Print System has been developed for peer-to-peer printing,allowing your print jobs to be sent directly to the AXIS5470e/570/670e.Notes:AXIS Print System requires AXIS firmware version 6.0 or higher in your AXIS5470e/570/670e print server. Visit the Axis web site http://www.axis.com forfirmware upgrades.• AXIS Auto-Go is a printing utility that contains AXIS IP-Installer, AXIS PrintSystem and AXIS Print Monitor. AXIS Auto-Go can be down-loaded fromthe Axis web site: http://www.axis.com.• You can install AXIS Print System as a Custom Version (recommended forNetwork Administrators) or a Typical Version (recommended for regularusers.) The difference between them is that the Custom Version includes anIP settings application called AXIS IP Installer.
