AXIS 5470e/570/670e User’s Manual Appendix F: IPDS Overview 265Appendix F IPDS OverviewThis section describes:•IPDS parameter settings•IPDS fontsIPDS Parameter SettingsBefore printing IPDS data streams, the basic parameters should be set.This is done from the AXIS 5470e/570/670e web pages under IBMEmulators | Detailed view (IBM IPDS Emulator Settings) where youcan configure the common parameters of the IPDS emulator and IBMEmulators | Detailed view (SCS/IPDS Emulator Configurations)where you can configure the settings for each session.IPDS System LanguagesThe AXIS 5470e/570/670e must be set up for the System Language ofyour IBM system configuration in order to obtain the correctcharacters in each specific language. This is done from the IBMEmulators | Detailed view (SCS/IPDS Emulator Configurations)page.The default selection is US English (Code Page 37).The following table describes the valid IPDS system languages:Code page System language*37 US English, Portuguese Alternate and CanadianBilingual256 International set 1259 Symbols set 7260 Canadian French273 Austrian/German274 Belgian
