Axis 5600 User Manual

Also see for 5600+: Specification User guide Installation guide User guide User manual

Contents

Axis 5600 User Manual Manual pdf 3 page image

AXIS 5600 User’s Manual2NetWareUNIX WindowsOS/2MacintoshSafety NoticesPlease take some time to read through the safety notices before installing the AXIS 5600.Caution! - must be observed to avoid loss of data or damage to your equipment.Important: - must be observed to avoid operational impairment.Do not proceed beyond any of the above notices unless you have taken appropriate measures!Electromagnetic Compatibility (EMC) notices - USAThis equipment generates and radiates radio frequency energy and if not installed and used in accordance with the instructionmanual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class Acomputing device pursuant to Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against suchinterference when operated in a commercial environment. Operation of this equipment in a residential area is likely to causeinterference in which case the user at his own expense will be required to take whatever measures may be required to correct theinterference. Shielded cables should be used with this unit to ensure compliance with the Class A limits.Electromagnetic Compatibility (EMC) notices - EuropeThis digital equipment fulfils the requirements for radiated emission according to limit B of EN55022/1994, and the requirementsfor immunity according to EN50082-1/1992 residential, commercial, and light industry (Compliance is not valid for unshieldednetwork and printer cables).LiabilityEvery care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform us bycontacting your local Axis office. AXIS Communications AB cannot be held responsible for any technical or typographical errors andreserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty ofany kind with regard to the material contained within this document, including, but not limited to, the implied warranties ofmerchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental orconsequential damages in connection with the furnishing, performance or use of this material.Year 2000 complianceAxis Communications warrants that the AXIS 5600, with software versions 5.48 or later, is Year 2000 compliant.Axis’ TrademarksNetPilot, ThinServer, ThinWizard.Other Trademark AcknowledgmentsAIX, Apple, DEC, DOS, Ethernet, EtherTalk, HP, IBM, JetAdmin, Internet Explorer, LAN Manager, LAN Server, LANtastic,Macintosh, Microsoft, MVS, NDPS, Netscape, Novell NetWare, OS/2, OS/400, PostScript, SCO, UNIX, VM, VMS, VSE,Windows, are registered trademarks of the respective holders.AXIS 5600 User’s Manual Revision 1.3Part No: 17154 Date: January 2000Copyright © Axis Communications AB, 1998 - 2000